Psilocybin Semilanceata Magic Mushroom is the most common or the liberty cap and it is commonly found in pastures or verges. The cap of the mushroom will change color depending on how much moisture it retains. In wet conditions the color will be yellowish-brown. Psilocybin Semilanceata Magic Mushroom has a glutinous layer which can be removed. When dry out the color fades from the mushroom. The conical cap remains a similar shape throughout these changes. It has striated markings with a distinctive small nipple at the very top
The thin stem can grow up to 7 or 8cm. The gills are pale creamy-grey at first, but as the mushroom matures they become a dark purple-brown.
- Spore syringe, 10-12 cc
- Organic brown rice flour
- Vermiculite, medium/fine
- Drinking water.
- 12 Shoulderless half-pint jars with lids (e.g. Ball or Kerr jelly or canning jars)
- Hammer and small nail
- Measuring cup
- Mixing bowl
- Heavy-duty tin foil
- Large cooking pot with a tight lid, for steaming
- Small towel (or approx. 10 paper towels)
- Micropore tape
- Clear plastic storage box, 50-115L
- Drill with inch drill bit
- Mist spray bottle
- Rubbing alcohol
- Butane/propane torch lighter
- Surface disinfectant
- Air sanitizer
- Sterilized latex gloves (optional)
- Surgical mask (optional)
- Still air or glove box (optional)
This method of mushroom cultivation is cheap and pretty straightforward, therefore, perfect for the newbie fungi farmer and experienced fungiculturist alike. You prepare your substrate of brown rice flour, vermiculite, and water, and divide it between sterile glass jars.
Introduce spores and wait for the mycelium to develop. This is the network of filaments that will underpin your mushroom growth. After 4-5 weeks, transfer your colonized substrates, or cakes, to a fruiting chamber and wait for your mushrooms to grow.
NOTE: Always ensure good hygiene before starting: spray an air sanitizer, thoroughly disinfect your equipment and surfaces, take a shower, brush your teeth, wear clean clothes, etc. You dont need a lot of space, but your environment should be as sterile as possible. Opportunistic bacteria and molds can proliferate in conditions for cultivating shrooms, so its crucial to minimize the risk.
STEP 1: PREPARATION
1) Prepare jars:
- With the hammer and nail (which should be wiped with alcohol to disinfect) punch four holes down through each of the lids, evenly spaced around their circumferences.
2) Prepare substrate:
- For each jar, thoroughly combine cup vermiculite and cup water in the mixing bowl. Drain excess water using the disinfected strainer.
- Add ? cup brown rice flour per half-pint jar to the bowl and combine with the moist vermiculite.
3) Fill jars:
- Being careful not to pack too tightly, fill the jars to within a half-inch of the rims.
- Sterilize this top half-inch with rubbing alcohol
- Top off your jars with a layer of dry vermiculite to insulate the substrate from contaminants.
4) Steam sterilize:
- Tightly screw on the lids and cover the jars with tin foil. Secure the edges of the foil around the sides of the jars to prevent water and condensation from getting through the holes.
- Place the small towel (or paper towels) into the large cooking pot and arrange the jars on top, ensuring they dont touch the base.
- Add tap water to a level halfway up the sides of the jars and bring to a slow boil, ensuring the jars remain upright.
- Place the tight-fitting lid on the pot and leave to steam for 75-90 minutes. If the pot runs dry, replenish with hot tap water.
NOTE: Some growers prefer to use a pressure cooker set for 60 minutes at 15 PSI.
5) Allow to cool:
- After steaming, leave the foil-covered jars in the pot for several hours or overnight. They need to be at room temperature before the next step.
STEP 2: INOCULATION
1) Sanitize and prepare syringe:
- Use a lighter to heat the length of your syringe’s needle until it glows red hot. Allow it to cool and wipe it with alcohol, taking care not to touch it with your hands.
- Pull back the plunger a little and shake the syringe to evenly distribute the magic mushroom spores.
NOTE:?If your spore syringe and needle require assembly before use, be extremely careful to avoid contamination in the process. Sterilized latex gloves and a surgical mask can help, but the surest way is to assemble the syringe inside a disinfected still air or glove box.
2) Inject spores:
- Remove the foil from the first of your jars and insert the syringe as far as it will go through one of the holes.
- With the needle touching the side of the jar, inject approximately cc of the spore solution (or slightly less if using a 10 cc syringe across 12 jars).
- Repeat for the other three holes, wiping the needle with alcohol between each.
- Cover the holes with micropore tape and set the jar aside, leaving the foil off.
- Repeat the inoculation process for the remaining jars, sterilizing your needle with the lighter, and then alcohol between each.
STEP 3: COLONIZATION
1) Wait for the mycelium:
- Place your inoculated jars somewhere clean and out of the way. Avoid direct sunlight and temperatures outside 70-80 ?F (room temperature).
- White, fluffy-looking mycelium should start to appear between seven and 14 days, spreading outward from the inoculation sites.
NOTE:?Watch out for any signs of contamination, including strange colors and smells, and dispose of any suspect jars immediately. Do this outside in a secure bag without unscrewing the lids. If you’re unsure about whether a jar is contaminated, always err on the side of caution even if the substrate is otherwise healthily colonized as some contaminants are deadly for humans.
- After three to four weeks, if all goes well, you should have at least six successfully colonized jars. Leave for another seven days to allow the mycelium to strengthen its hold on the substrate.
STEP 4: PREPARING THE GROW CHAMBER
1) Make a shotgun fruiting chamber:
- Take your plastic storage container and drill -inch holes roughly two inches apart all over the sides, base, and lid. To avoid cracking, drill your holes from the inside out into a block of wood.
- Set the box over four stable objects, arranged at the corners to allow air to flow underneath. You may also want to cover the surface under the box to protect it from moisture leakage.
NOTE: The shotgun fruiting chamber is far from the best design, but it’s quick and easy to build and does the job well for beginners. Later, you may want to try out alternatives.
2) Add perlite:
- Place your perlite into a strainer and run it under the cold tap to soak.
- Allow it to drain until there are no drips left, then spread it over the base of your grow chamber.
- Repeat for a layer of perlite roughly 4-5 inches deep.
STEP 5: FRUITING
1) ?Birth? the colonized substrates (or cakes):
- Open your jars and remove the dry vermiculite layer from each, taking care not to damage your substrates, or cakes, in the process.
- Upend each jar and tap down onto a disinfected surface to release the cakes intact.
2) Dunk the cakes:
- Rinse the cakes one at a time under a cold tap to remove any loose vermiculite, again taking care not to damage them.
- Fill your cooking pot, or another large container, with tepid water, and place your cakes inside. Submerge them just beneath the surface with another pot or similar heavy item.
- Leave the pot at room temperature for up to 24 hours for the cakes to rehydrate.
3) Roll the cakes:
- Remove the cakes from the water and place them on a disinfected surface.
- Fill your mixing bowl with dry vermiculite.
- Roll your cakes one by one to fully coat them in vermiculite. This will help to keep in the moisture.
4) Transfer to grow chamber:
- Cut a tin foil square for each of your cakes, large enough for them to sit on without touching the perlite.
- Space these evenly inside the grow chamber.
- Place your cakes on top and gently mist the chamber with the spray bottle.
- Fan with the lid before closing.
5) Optimize and monitor conditions:
- Mist the chamber around four times a day to keep the humidity up, taking care not to soak your cakes with water.
- Fan with the lid up to six times a day, especially after misting, to increase airflow.
NOTE:?Some growers use fluorescent lighting set on a 12-hour cycle, but indirect or ambient lighting during the day is fine. Mycelium only needs a little light to determine where the open air is and where to put forth mushrooms.
STEP 6: HARVESTING
1) Watch for fruits:
- Your mushrooms, or fruits, will appear as tiny white bumps before sprouting into pins. After 5-12 days, they’ll be ready to harvest.
2) Pick your fruits:
- When ready, cut your mushrooms close to the cake to remove. Dont wait for them to reach the end of their growth, as they’ll begin to lose potency as they mature.
NOTE: The best time to harvest mushrooms is right before the veil breaks. At this stage, they’ll have light, conical-shaped caps and covered gills.
Special Precautions and Warnings
When taken by mouth: Psilocybin is possibly safe when used as a single dose under medical supervision. Single doses of psilocybin have been used in controlled settings without serious side effects. The most common side effects include confusion, fear, hallucinations, headache, high blood pressure, nausea, and paranoia. Despite being a controlled substance in the US, the risk for abuse seems low. Withdrawal symptoms and physical dependence don’t appear to be a major concern.
There isn’t enough reliable information to know if psilocybin is safe to use without medical supervision at any dose, including micro doses. Pregnancy and breast-feeding: There isn’t enough reliable information to know if psilocybin is safe to use when pregnant or breast-feeding. Stay on the safe side and avoid use.
Bipolar disorder: Psilocybin might increase the risk of mania in people with bipolar disorder or those with a family history of bipolar disorder.
Heart disease: Psilocybin might increase the risk of cardiac arrest and death in people with heart disease.
Psilocybin has most often been used by adults in single doses of 0.2-0.42 mg/kg by mouth as part of a medically supervised, drug-assisted psychotherapy program. Some people also use psilocybin in “micro doses”, but there isn’t enough reliable information to know what an appropriate dose might be.
Psilocybin is illegal under federal law in the US. It is classified as a Schedule I controlled substance.
Side Effects OF Psilocybin Semilanceata Magic Mushroom
The effects of psilocybin are generally similar to those of LSD. They include altered perception of time and space and intense changes in mood and feeling.
Other possible effects of psilocybin include:
- spiritual awakening
- derealization, or the feeling that surroundings are not real
- depersonalization, or a dream-like sense of being disengaged from surroundings
- distorted thinking
- visual alteration and distortion, such as seeing halos of light and vivid colors
- dilated pupils
- drowsiness and yawning
- impaired concentration
- muscle weakness
- lack of coordination
- unusual body sensations
- nausea and vomiting
- frightening hallucinations
The effects of psilocybin vary between people, based on the user?s mental state, personality, and immediate environment.
If the user has a mental health?condition or feels anxious about using the hallucinogen, they face a higher risk of having a bad experience.
Psychological distress is the adverse event most often reported after recreational use of psilocybin. This distress can take the form of extreme anxiety or short-term psychosis.
Why buy from Us
Magic Mushrooms Dispensary will always do it’s best to ensure that your products arrive in a safe and timely manner. All packages will come in discreet packaging and will not come labeled with the contents of the package clearly labeled.
All of our packages are shipped through a traceable and secure method. In the rare event that a package goes missing or is damaged, we will do our best to make the situation right. This includes investigating with the shipping courier, and replacing, crediting, or refunding the order.